Relax The Back LITO Manuel D'utilisation Et D'entretien page 7

take control
RECLINE LOCK INDICATOR:
maximum manual recline is locked; Press
the UNLOCK button to unlock it.
MEMORY 1 / SET: To store the
chair's curent position settings,
press and hold both Memory 1
and Set buttons until the LED
flashes three times.
BACKREST: Use these buttons to
manually recline and incline the
chair. To recline the backrest to its
maximum position, make sure the
Recline Lock indicator is NOT lit
(press the UNLOCK button if it is),
then press and hold the down arrow
to recline the backrest to its maximum
position.
RESTORE: Press and hold to restore
the chair to the upright position with
footrest retracted.
TV: Press to place the chair in the TV
position.
READING: Press to place the chair in
the Reading position.
HEAT: Press to turn seat and
backrest heat on/off. The heat
automatically turns off after one
hour.
UNLOCK: If the Recline Lock
Indicator is lit, press the UNLOCK
button then press and hold the down
arrow to recline the backrest to its
maximum position.
relaxtheback.com
Lights when
MEMORY 2 / SET:
To store the chair's
curent position settings, press and hold
both Memory 2 and Set buttons until the
LED flashes three times.
ZG:
Press to place the chair in
zero gravity position, with your legs
above your heart.
FOOTREST: Use these buttons to deploy
and retract the footrest.
NAP: Press to place the chair in the
Nap position.
MAX: Press and hold to fully recline
the backrest and raise the footrest
to maximum height.
NOTE: When the chair is moving
automatically to a selected preset position,
pressing any button will immediately stop
all movement.
10
Once you're in the desired position, you can use one of the two memory
settings to store it for future use. And don't forget to add soothing seat
and backrest heat for extra muscle relaxation.
Safety Feature: Battery Backup
Your zero gravity recliner has a built-in battery backup system, to ensure that you can incline and exit the chair if a
power failure occurs. The battery backup system uses two common 9V batteries (not included). Be sure to note the date
you installed the batteries and replace them on a regular basis, to ensure that the battery backup system is functional.
IMPORTANT: To use the built-in battery backup system to incline and exit the chair during a power failure, press and
hold the restore button to automatically restore the chair to the upright position.
IMPORTANT: The batteries can only be used ONCE; after using the battery backup
system, replace the batteries immediately.
11