Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
L. POWER BANK FUNCTION ( CHARGE OUTPUT DC 5V
1A MAX. )
Before use the power bank function, make sure that the device's internal battery is full
charged. Or, we recommended, it has enough energy, about 51 ~ 75% or more, for
charge the external device.
a. To check the battery remaining energy level:
1. Short press the "
(15)" button until the "Charge LED (18)" indicators will light
in seconds for show the battery energy remaining levels.
2. The "Charge LED (18)" indicators will illumines as follow methods;
- 4 lights on then light off if battery about 90 ~ 100% energy.
- 3 lights on then light off if battery about 51 ~ 75% energy.
- 2 lights on then light off if battery about 26% ~ 50% energy.
- 1 lights on then light off if battery below 25% energy.
b. Power Bank Connection and Control:
1. The "Type-A USB (2)" socket is for charge output connection and provide DC 5V
1A (max.) rated power.
2. The device's power bank charge output designed with auto detect feature, it could
turn ON automatically the charge output function when the external device's charge
input has connected with it.
3. Besides, the "
(15)" button provide a manual control to turn ON the charge out-
put function, in case of some external device(s) need.
4. Short press the "
(15)" button can turn ON the charge output function manually.
However, the charge output function will turn OFF automatically in few seconds, if no
device has connected.
c. To charge your mobile device:
1. Plug the USB cable into the device's "Type-A USB (2)" socket and then connect
the other end of USB cable to the external device. The device's charge output func-
tion will turn ON automatically.
2. The "Charge LED (18)" indicators are turn on in constant red and the external
device is in charging. (If you see only one"Charge LED (18)" indicator left and is
in flashing fast when you using the charge output connection, it means the device's
battery is in very low level and the charge output will stop automatically in seconds).
3. After the external device is fully charged, remove the USB cable, the charge output
supply will be cut off automatically in few seconds.
Remark:
The Power Bank function cannot activate if the battery level is lower than 25% even
you try to turn ON the power bank's charge output function.
XX
17
53152120 - NOTICE LANTERNE BOIS BLUETOOTH.indd 29
25/07/2019 14:10:47
Publicité
Table des Matières
