Reset The Device - NATURE & DECOUVERTES 53152120 Notice

M. USE LIGHTS FUNCTION
This device has been designed with 2 lights effect, LED light(white) and candle
light(orange).
LED light:
1. Short press the "
2. Press once to lower the LED light brightness if you want, press it again to turn Off
the LED light, press it once again to turn on it......the light effect will take turns like
this.
3. Short press the "
Candle light:
1. Long press the "
2. Short press the "
N. RESET THE DEVICE
1. In some circumstances the device's function may hanging and need to reset. To do
this;
2. Press the " (11)" and "
and turn itself to Off automatically.
3. And now, power On the device by long press the "
Important: Do not reset the device if it is proper working.
O. SPLASH - PROOF HANDLING
1. This device can handle a brief jet of water on its surface (Splash-Proof IPX4).
2. However, it should never be operated under running water and under no circums-
tance it should never be fully immersed in water.
3. Before use the device, make sure that the "Silicon Seal Cover (4)" is tightens
closed at the right position.
4. After used, always wipe the outside of the cabinet thoroughly if it becomes wet with
moisture or water splashes. This will help to prevent the internal parts of the unit from
entry of water and possible moisture damage.
53152120 - NOTICE LANTERNE BOIS BLUETOOTH.indd 28
(17)" button to Power On the white LED light;
(17)" button to Power Off the LED light;
(17)" button to turn On the candle light if the white light is on;
(17)" button again to Power Off the candle light.
(12)" buttons at the same time, the device should reset
18 XX
(15)" button for 2 ~ 3 seconds.
25/07/2019 14:10:47