Generis G750 And G950 8.80M Platform Assembly - NF GENERIS 750 Notice De Montage Et D'utilisation

3-4. GENERIS G750 and G950 8.80m platform assembly

1. Assemble the G950 8.80m by carefully repeating steps §3-1 to §3-1-6 without pre-
mounting the 0.60m extension on to the 1.50m extension.
2. From the ground, remove the 2 temporary guard rails from rung no. 5, and then mount
them definitively on rung no. 10 by following §3-1-7.
3. Mount the 3
4. Remove the temporary platform from rung no. 2, and then mount it definitively on rung
no. 7 by following §3-1-9.
5. Mount the 1
6. Mount the four S2 stabilisers by following §3-5-1, and then fasten them above rungs no. 1
and no. 8 using the 2 clamps.
7. Check the positioning of the 4 stabilisers by following §3-8.
8. Mount the two 1.50m extensions (without the 0.60m extension) by following §3-1-6.
9. Mount the 2 temporary guard rails on rung no. 14.
10. Mount the two 1.50m extensions (without the 0.60m extension) by following §3-1-6.
11. Remove the two temporary guard rails, and then mount them definitively on rung no. 17
by following §3-1-7.
12. Mount the 5
13. Mount the 2
106-A000035745 - ind.0 – 11/2021
rd th
and 4 cross braces by following §3-1-10.
st nd
and 2 cross brace by following §3-1-8.
th th
and 6 cross braces by following §3-1-10.
nd
permanent platform on rung no. 14 by following §3-1-9.
80