Publicité
Les langues disponibles
Les langues disponibles
*Cleaning the boiler is important to the performance of the iron*
6. Cleaning
Soleplate
Before cleaning the iron be sure that the unit is disconnected from the power supply and that
the iron is completely cooled down. Do not use abrasives on the soleplate. Deposits and
other residues on the soleplate can be removed with a cloth soaked in a vinegar and water
solution. Keep the soleplate smooth by avoiding contact with hard or abrasive surfaces.
boiler Tank
Using your measuring cup fill to slightly below max line with 1/2 vinegar and 1/2 water. Be
sure that tank is completely empty and fill with vinegar and water solution. Place safety
cap on tightly, be sure that steam dial is in off position (turn counter clockwise) and plug
into a power surge protection bar. Turn on and let unit heat up until power switch indicator
light goes off. Turn off and unplug from power source, let sit for 10 minutes and then shake
vigorously. Let cool for another 10 minutes, depress and hold down the steam button until
no more steam comes out. Unscrew safety cap and empty tank contents. This may need to
be done several times depending on how long since the last cleaning and the type of water
used. To complete, rinse tank with clear water until vinegar odour dissipates.
TIP
*For best ironing results use a mesh-type ironing board to allow
excess steam to escape.
®
*Always rest your Eurosteam
iron horizontal on the rubber mat
and never on its heel.
*do not let soleplate contact anything that could scratch or damage the soleplate,
such as zippers or metal studs.
7
ClEANING YOUR EUROSTEAM ®
Publicité
