EIO AirBox Topo Vivo 6 Mode D'emploi page 11

Operation
10
Lock elbow of vacuum hose into the air
intake opening. Put on the necessary noz-
zles. Nozzles may be put on the vacuum
tube or hose.
Pull out mains cable, put plug into socket.
Press the ON/OFF tread key to start the
motor.
Electronic power control by variable trans-
former. Turn the vacuum power control by
hand to set the desired power level.
The suction force can additionally be con-
trolled at the handle.
Closed - high suction force
Open - low suction force