Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
•
After removing the packaging, and before use, make sure
the appliance and all the attachments are working well. The
electrical plug and sheath should not be cracked or broken. If the
conditions described above are observed or in case of fault and/
or malfunctioning, immediately unplug the appliance from mains
outlet and take it to an authorized After- Sales Service Centre for
necessary checking. Non-compliance with what has been stated
above could compromise the safety of the appliance.
•
The packing materials (plastic bags, expanded polystyrene, nails,
etc.) should be kept away from children since they are potential
sources of danger.
•
Place the appliance on a flat, smooth, and stable surface. Do not
put it close to/on hot surfaces, as heaters, cooking hobs, ovens, gas
ranges, open flames, etc.
•
Before connecting the appliance, make sure the line voltage is
correct. The label is located on the bottom of the appliance body.
•
In general, it is not advisable to use an adaptor, multiple socket or
an extension cord. If they are necessary, use only simple or multiple
adaptors and extension cords that conform to safety regulations,
being careful not to exceed the load limits indicated on the adaptor
and the extension cord, and the maximum power indicated on the
multiple adaptor.
•
Do not leave the appliance connected when not in use. Remove the
plug from the mains outlet when the appliance is not used.
•
Empty the jug after each use.
FOR YOUR PERSONAL SAFETY, IT IS ADVISABLE TO
POWER THE APPLIANCE BY MEANS OF A DIFFERENTIAL
SWITCH (RCD), WHOSE OPERATING CURRENT DOES
NOT EXCEED 30mA.
CONNECT THE APPLIANCE TO THE POWER MAINS ONLY
WITH AN EARTHED PLUG.
28
2. Warnings
Publicité
Table des Matières
