Selection Of Baud Rate; Selection Of Bit Rate And Parity; Default Set) - Adam Equipment CPW plus Serie Mode D'emploi

EN
13.1.5

SELECTION OF BAUD RATE


The fifth parameter is to select the baud rate per second
which is the speed of sending data to RS-232 interface.
Display will show "b 9600" (DEFAULT SET)

Use the [Tare/Zero] key to scroll through the options.

There are three options-

Press the [Unit] key to confirm the selection and move to the
next parameter.
13.1.6

SELECTION OF BIT RATE AND PARITY

 The sixth parameter is to select the bit rate and parity used
for sending data to RS-232 interface. Display will show "PAr

1" (DEFAULT SET)

 Use the [Tare/Zero] key to scroll through the options.
 Press the [Unit] key to confirm the selection and move to the
next parameter.
© Adam Equipment Company 2014
8 bits no parity
7 bits even parity
7 bits odd parity
18 9009RevD2-March 2017