Schneider Airsystems RF 6 XG 0,6 Notice D'utilisation D'origine page 21

Table of contents - Part 2
2.1 General information ..................
2.2 Symbols and their meaning ........
2.3 Safety instructions ....................
2.4 Calibration ...............................
2.5 Commissioning .........................
2.6 Maintenance.............................
2.7 Decommissioning......................
2.8 Warranty .................................
2.1 General information
Observe the safety instructions!
Read the Instruction Manual Part 1 and
2!
Before the unit is used, the Instruction Man-
ual must be read and understood and the
user must receive annual instruction.
Subject to technical modifications. Figures
(at the start of the Instruction Manual) may
vary from the original.
Suitable energy supply: only filtered com-
pressed air or nitrogen free of condensate
and oil.
2.2 Symbols and their meaning
Read the Instruction Manual
Warning against dangers
Explosion hazard!
Tripping hazard!
Service addresses
2.3 Safety instructions
DANGER
Risk of explosion!
Do not use in potentially explosive areas.
Observe the maximum pressure!
Use compressed air or nitrogen energy
only.
3
DANGER
3
Risk of suffocation when using nitro-
3
gen.
4 Only use in a well-ventilated room!
4
4
WARNING
4
4
Whipping movement of filling hose dur-
ing the filling or draining operation.
Hold the filling hose securely at the plug.
Do not kink the filling hose.
WARNING
Uncontrolled movement of compressed
air hose when quick-action coupling is
opened!
Hold the compressed air hose tightly!
CAUTION
Dangerous obstacle!
Air hoses laid on the ground.
Avoid or pay close attention.
• Be calm and focused and ensure proper
operation.
• Protect yourself and other persons, ani-
mals, property, and the environment by
taking the necessary protective measures
and being trained in use of the devices to
prevent harm to your health, property
damage, financial
harm or risk of accident.
• Repairs may be carried out only by
Schneider Druckluft GmbH or its approved
service partners.
• Prohibited: manipulation, inappropriate
use, temporary repairs, use of other ener-
gy sources, removal or use of damaged
safety equipment, operating a leaking or
malfunctioning system, use of non-original
spare parts, exceeding the permitted
working pressure specified (max. + 10%),
working without protective equipment,
transporting / maintaining / repairing or
leaving a pressurised machine unattended,
using other / unsuitable lubricants, smok-
ing, naked flames, removing stickers.
GB
RF
loss, environmental
II/3