Selecting The Sound Mode (Depending On The Model); Connecting Headphones (Sold Separately) - Samsung 5 Serie Mode D'emploi

Selecting the Sound Mode
The DUAL I-II button displays/controls the processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either "DUAL-I" or "Stereo", depending on the
current transmission.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Dual I-II.
3 Press the ◄ or ► button to select the required option.
Type of broadcast
Regular broadcast
(Standard audio)
Regular + NICAM
Mono
NICAM
Stereo NICAM-Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2 Zweisprachig oder
Stereo Dual-I/II
Stereo
If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs, switch to Mono.
This function is only available in Analogue TV mode.

Connecting Headphones (Sold separately)

You can connect a set of headphones to your set if you wish to watch a TV program without
disturbing other people in the room.
When you insert the head set jack into the corresponding
port, you can operate only
DTV : Audio Language,Audio Format, Audio Description,TV
Speaker,Sound Reset
ATV : TV Speaker, Sound Reset
PIP : Sound Select, Sound Reset in Sound menu.
Prolonged use of headphones at a high volume may
damage your hearing.
You will not hear sound from the speakers when you
connect headphones to the TV.
The headphone volume and TV volume are adjusted
separately.
(depending on the model)
On-screen indication
Mono (Normal use))
NICAM
(Normal)
NICAM
Stereo (Normal)
NICAM NICAM
Dual-1 Dual-2
Mono (Normal use))
Dual I Dual II
Stereo
(Forced mono)
English - 34
Device List
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
Dual I II
Mono
Mono
Mono
(Normal)
Mono
Tools
: Standard
: Standard
: Off
: Off
: Off
◄ Mono ►
Move Adjust Exit
TV Side Panel
15