Using Your Jabra Stone2 With Two Mobile Devices - Jabra Stone2 Mode D'emploi

Jabra Stone2 StatusDisplay
non-activity to save battery . only when in pairing mode the
StatusDisplay
tM
the headset is still active .
Light indicator on charging unit:
by the charge plug on the charging unit a light indicator shows
different states during charge of the product (aC charger or USb
cable)
Portable charging unit - light indicator
Solid red light
no light
Battery Status display on charging unit:
the display shows how much battery left in the charging unit . the
display will light up every time the headset is inserted into the
charging unit .
Battery Status display on portable charging unit
3 green lights flashing
2 green lights flashing
1 green light flashing
UsInG YoUR JABRA stone2 WItH tWo MoBILe
DeVICes
the Jabra Stone2 is capable of having two mobile phones (or
Bluetooth® devices) connected to the headset at the same time .
this will give you the freedom of having only one headset to
operate both of your mobile phones .
How to pair your Jabra STONE2 with 2 Bluetooth® devices:
1 Pair device number 1 with your headset using the pairing
instruction above for re-pairing your headset (if device 1 is
paired to your headset already go to step 2)
will turn off after 4 seconds of
tM
will remain turned on for longer time (3 min) .
Is charging (red light will turn off when
fully charged)
Fully charged
More than 5½ hours talk time left (>66%)
2½ to 5½ hours talk time left (33-66%)
Less than 2½ hours talk time left (<33%)
Jabra Stone2
11