Inactive Standby - Grundig DSB 980 Manuel D'utilisation

SYSTEM SETTING ____________________________
Keep network connected:
• If you choose to keep network connected, the
WiFi will not disconnect even you are in standby
mode or non-network mode.
Note:
• The soundbar will shut down its Wi-Fi connection
when it is in standby. This minimizes power
consumption but it does mean that you will
need to switch the radio on manually in order
to use any other remote control software (like
UNDOK app). if you want to remotely control the
Soundbar even when it has been switched into
standby.
• You can also choose to keep the network
connected by using the "Keep network
connected"option in the network settings menu.
• In the standby mode, the Wi-Fi signal indicator
is displayed with or without a cross through it
according to the chosen network settings.
• You will then need to set "Keep network
connected "option.
Time/Date
• Set the time manually or auto update, time
format, time zone and daylight. Details can be
referred to Setting date and time under Section
First-time setup.

Inactive Standby

• This unit can switch to standby automatically
after a set period of time.To set the inactive
standby timer, select [inactive standby]. Choose
from OFF, 2, 4, 5 or 6 hours and confirm.The
currently set hour is indicated with an asterisk.
Note:
• After the setting is completed, the store mode
will remain activated until it is disabled by the
user.
Language
• Change it as your preference. Available
languages: English, Danish, Dutch, Finnish,
French, German, Italian, Norwegian, Polish,
Portuguese, Spanish, Swedish, Turkish.
Factory Reset
• Resetting all user settings to default values, so
that time and date, network configuration and
presets are lost. However, current software
version of the radio is maintained.
Software Update
• Auto-check setting: This option automatically
checks for new updates from time to time.
Automatic updating is enabled by default. Check
now: Search for available updates immediately.
You will be asked if you want to go ahead
with download and installation of an update.
After a software upgrade, all user settings are
maintained.
Note:
• Before starting a software upgrade, ensure that
the radio is plugged into a stable main power
connection. Disconnecting power during an
upgrade may permanently damage the unit.
Setup Wizard
• With this function, you can start the setup wizard
at any time. Any parameters or stations entered
already are not deleted. For more information,
please read the Section First-time setup.
Info
• View the firmware version and the radio ID.
Privacy Policy
• View the information of Privacy Policy.
ENGLISH 43