Programming the Timer–RUN TIME
This is where you will set up how long
each zone will run.
Turn the dial until the selection box is on
RUN TIME and press the dial.
The station number will flash–turn the
dial until the desired zone is flashing and
press the dial.
The duration for that zone will flash–turn
the dial until the desired duration is
showing and press the dial.
Repeat this process for each zone you
wish to set up.
If you wish to set-up zones in different
programs, A B or C, press the PROG
ABC button until the program is
showing in the LCD.
20
Note: Programming for each of the features covered
here can be accomplished at the timer or with the app.