Possible Settings; Air Shutter Adjustments - Garland AIRDECK G56PB Manuel D'installation Et D'utilisation

OPERATION Continued

Air Shutter Adjustments

To adjust the dampers, loosen wing nut holding damper
position, with deck and damper tool provided, insert the
damper end of the tool into the receptacle on the damper,
and raise the damper to disengage the damper from the
notched position, slide the damper at a 45 degree angle to
engage the next position, retighten wing nut.

Possible Settings

PIZZA PRODUCT
Fresh Dough Cheese Pizza
Fresh Dough with Toppings
Pre-Baked Dough Cheese Pizza
Pre-Baked Dough with Toppings
Pre-Cooked Black Porcelain Pan
Deep Pan Pizza
Pre-Baked Party Pizza
Page 10
Lower Damper
To increase Top air, adjust upper damper "down". Position in
notch, and tighten thumb screw.
To increase Bottom Air, adjust lower damper "up". Position
damper in notch, and tighten thumb screw.
TIME TEMP F
6:00-7:00 450-575
7:30-8:30 450-475
5:00-6:00 450-475
5:30-6:30 450-475
10:00-12:00 475-500
8:30-9:30 475-500
16:00-20:00 475-500
Upper Damper
TEMP C UPPER
234-250 Fully Closed
234-250 1/2 Open
234-250 1/2 Open
234-250 1/2 Open
250-260 Fully Closed
250-260 Fully Closed
250-260 Fully Closed
Decrese Air
Increase Air
Increase Air
Decrese Air
LOWER
Fully Open
Fully Open
Fully Open
Fully Closed
Fully Open
Fully Open
Fully Open
Part # 1382670 (12/07)