Hama 00178245 Mode D'emploi page 4

Note
Always take your terminal device out of the holder
before attaching or removing the bracket (suction
cup holder).
3.3 Adhesive pad (magnetic)
Note – Adhesive surface
• Ensure that the mounting surface to which the
adhesive pad is to attach (such as the back of
a mobile phone, GPS navigation system, etc.) is
free of dust and grease. Use a suitable cleaning
agent from a specialised dealer to clean the
surface.
• Various environmental factors such as ambient
humidity, sunlight or cold can impair the
durability of the adhesive pad.
• We cannot guarantee that residue will not be
left on the mounting surface after the adhesive
pad is removed.
• Remove the protective foil from the adhesive side
of the magnetic pad, and press the pad onto the
adherend surface (for example, rear of mobile
phone) for a few seconds.
• The round magnetic pad can simply be inserted
between the protective cover and the back of the
mobile phone.
4. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
5. Service and Support
Please contact Hama Product Consulting if you have
any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
3