Vax C85-AS-PH-E Mode D'emploi page 26

Vacuum cleaning
Vacuum cleaning on carpet
To clean carpets thoroughly:
Activate the electric brush.
To clean carpets gently:
Deactivate the electric brush.
Vacuum cleaning on hard floors
To clean sensitive hard
floors (e.g. parquet, lami-
nate, stone floors): Attach
the parquet brush.
If you use the electric brush
for hard floors, make sure
that the electric brush is
switched off.
26
Alternatively, to gently clean carpets,
you can attach the floor nozzle. Make
sure that the switch is set to the "carpet"
position (see below).
To clean hard floors with
crevices and joints: Attach
the hard floor tool.
If you use the switchable floor
nozzle for hard floors, make sure
that the switch is in the "hard floor"
position (see below).