Interface Unit; Barman's Firmware - axiome BARman Manuel D'utilisation

1.4 - Interface unit

The interface unit allows the BARman
with a computer. The three magnetic contacts establish
the connection. This exclusive system transfers data to
and from a computer and recharges the battery at the
same time.
The different interfaces and the installation instructions
are described in the second volume: INTERFACES
OPERATING MANUAL.

1.5 - BARman's firmware

The firmware is the BARman 's operating system. Without firmware, it is not

possible to run a BARman . As the performance of the BARman
from time to time to satisfy the needs of the market, a number indicates the
firmware in use.
The latest firmware version is delivered with every programming software
package,

A new BARman always contains the latest firmware version.
From version 4.0 onwards, every upgrade is fully compatible with the oldest, it is
always possible to run the same programs (subject to one condition only: that
they have been recompiled with the corresponding compiler) if you upgrade the

and have the advantages of the new firmware.
BARman
The procedure for downloading new firmware into the BARman
the 3rd volume, chapter 1.6.
The firmware also includes a decoder module and the demo1 program, so the

is immediately ready for bar-code reading.
BARman
8
User's Guide

to communicate

is modified

is described in