Scope Of Use - Walter LT63006S Notice D'utilisation

- The tightness of the operator's grip on the handles
- Whether the tool is operated as described according to the Scope of Use stated in
this manual
- If the tool is used improperly or excessively it can cause vibration-related illness
CAUTION:
Depending on the way the tool is used and the operating conditions it can be
necessary to take the following safety precautions for the protection of the operator:
- Try to avoid exposure to vibration as much as possible
- Use only accessories that are in good condition.
- Wear anti-vibration gloves when using the tool
- Follow the instructions on maintenance and care contained in this manual
- Avoid operating the tool at temperatures below 10°C
- Plan your work in such a way so that you do not have to use vibrating tools over
several days

Scope of use

The plunge saw is designed for cutting wood and similar materials, plaster
and cement-bonded fiber boards as well as plastic s with the use of a suitable
plunge saw blade.
The machine may only be used for its intended purpose. Any other use is
forbidden. The manufacturer cannot be held responsible for damage or
injury caused by use the machine for other than its intended purpose. Only
accessories which are suitable for the machine may be used. Non-observance
of the safety, assembly and operating instructions while operating the appliance
counts as misuse. Anyone who operates or services the machine must be
familiar with these instructions and must be aware of possible dangers. Any
applicable health and safety regulations must also be followed.
Any other applicable local and national legislation must also be followed. The
machine may not be modified. The manufacturer can accept no responsibility
for damage or injury caused by modifications to the machine.
This product is designed for DIY and domestic use only and is not suitable for
commercial, industrial or or heavy duty use.
Any other use of the product is expressly forbidden and counts is misuse.
39
630355_Anleitung_D,GB,FR.indb 39 11.12.15 11:06