Component List; Technical Data - Kress Elektrowerkzeuge KUX21 Notice Originale

safety of the power tool is maintaine.
HAMMER SAFETY
WARNINGS
1. Wear ear protectors. Exposure to noise can
cause hearing loss.
2. Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
3. Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
4. Always wear a dust mask.
SYMBOL
To reduce the risk of injury, user must
read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Wear protective gloves
Before any work on the machine itself,
pull the power plug from the outlet.
Concrete
High speed
Low speed
Tool Holder
Drilling/Hammering
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
Hammering

COMPONENT LIST

1.
CHUCK
2.
DEPTH GAUGE
3.
FUNCTION MODE SELECTION SWITCH
4.
GREASE BOX COVER
5. ANTI-VIBRATION HANDLE
6. ON / OFF SWITCH
7. AUXILIARY HANDLE
* Not all the accessories illustrated or described
are included in standard delivery.

TECHNICAL DATA

Type KUX21 (X21-designation of machinery,
representative of Rotary Hammer drill)
Voltage
Power input
No load speed
Impact rate
Impact energy
Protection class
Drilling capacity max.
(Concrete)
Machine weight
220-240V~50Hz
1050 W
0-610/min
4150/min
7.5J
/ll
38 mm
5.3 kg
7
EN