Operating The Trimmer - Rexel SmartCut A425 Manuel D'utilisation

Specifications
Models
Product code
Sheet Capacity 80g/m
2
Integrated Paper Guide
Size Guide
Cutting Length
Score
Wave Cut
Perforate
Rotary blade housing
1
Metric and Imperial scale guide
2
Transparent cutting edge guide
3
Trimmer base with calibrated grid
4
Cutting mat
5
Cutting mat removal groove
6
Usage Blocks
7
Parking Areas
8
Selecting your blade
Place the trimmer on a stable, flat surface such as a
1
table or desktop. Slide the rotary blade housing to the
"parking position" at the top or bottom of the stationary
rail (A1–P). Push and hold the rotary dial in while turning
to select function (A2); straight cut, wavy cut, perforation
or score.
Cutting restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal film, film containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry trimmer by holding on to the cutting blade
handle.
4
SmartCut™ A425 SmartCut™ A445
2101965 2101966
10 10
A4, A5 & A6 A3, A4, A5 & A6
Centimetres and Inches Centimetres and Inches
300mm 457mm
1-5 sheets 1-5 sheets
1-5 sheets 1-5 sheets
1-10 sheets 1-10 sheets
m
NOTE: Please retain this information regarding
safe operation of this paper trimmer
m CAUTION: Trimmer should be operated by an
adult or under adult supervision
m
CAUTION: Sharp blade, do not touch the edge of
the blade

Operating the trimmer

Place the material to be trimmed at the selected position
1
using transparent paper guide and hold the material
securely in place with left hand while cutting (B).
Tip: In addition to using the grid pattern and scale for
alignment, use the transparent cutting edge guide to
quickly and accurately align your cuts.
Push down firmly on the rotary blade housing (C1) and
2
slide to opposite end in one motion while keeping the
rotary blade depressed (C2).
• Always operate trimmer with both hands and on a stable
base or desk.
• Check the fittings of the rotary blade and safety cutting rail
from time to time.