Operating The Trimmer - Rexel SmartCut A515pro Manuel D'utilisation

Specifications
Models
Product code
Sheet Capacity 80g/m
2
Cutting Length
Integrated Paper Guide
Size Guide
Score
Perforate
* refer to paragraph 5 in the Operating the Trimmer, section D.
Trimmer base with calibrated grid
1
Metric and Imperial scale guide
2
Magnetic Back Stop
3
Rotary blade / handle assembly
4
Cutting Edge Guide
5
Safety cutting mat
6
Manual clamp
7
Paper Guide
8

Operating the trimmer

Place the trimmer on a stable, flat surface such as a
1
table.
A. Slide the rotary blade housing to the top of the
2
stationary rail. A1. To change cutting style push and
hold the blade selector knob while turning to select the
function desired.
B. Raise the clamping handle and place the sheets (30
3
sheets Max.) to be trimmed at the desired position.
Cutting restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal film, film containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry trimmer by holding on to the cutting blade
handle.
4
SmartCut™ A515pro
2101967
30
*
380mm
A4, A5, A6 & A7
Centimetres and Inches
1-5 sheets
1-5 sheets
SmartCut™ A525pro SmartCut™ A535pro
2101968 2101969
30 30
457mm 609mm
A3, A4, A5, A6 & A7 A3, A4, A5, A6 & A7
Centimetres and Inches Centimetres and Inches
1-5 sheets 1-5 sheets
1-5 sheets 1-5 sheets
m
NOTE: Please retain this information regarding
safe operation of this paper trimmer
m
CAUTION: Trimmer should be operated by an
adult or under adult supervision
m
CAUTION: Sharp blade, do not touch the edge of
the blade
C. Hold sheets securely in place and lower the clamping
4
handle.
D. Push down on the rotary blade housing and slide
5
to cut. Several cutting passes may be necessary to
completely cut through all sheets depending on the load
inserted.
TIP: In addition to using the grid pattern and scale for
alignment, use the transparent cutting edge guide to
quickly and accurately align your cuts.
• Always operate trimmer with both hands and on a stable
base or desk.
• Check the fittings of the rotary blade and safety cutting rail
from time to time.