Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3-Control panel
When the function is activated the temperature of the programme cannot be changed.
If "Temp." button is pushed the "Steam" function will be deactivated. You can activate
"Steam" function only before to start any programme. You cannot activate "Steam" func-
tion while the appliance is already executing a programme.
3-5-4
3-5-5
3-6
3-6
3-7
3-8-1
3-8-2
Press this button (Fig. 3-5-4) to rinse the laundry more
times with fresh water. This is recommended for peo-
ple with sensitive skin.
By pressing the button several times one to three addi-
tional cycles can be selected. They appear in the display
/
with
/
This function saves time and energy. Preferable if laun-
dry is slightly soiled. Press simultaneously button "Extra
rinse." and "Delay" (Fig. 3-5-5) for about 3 seconds to
activate the "Speed up" function;
This function is not available in all programmes (see
PROGRAMMES).
3.6 Function button "Delay"
Press this button (Fig. 3-6) to start the programme with
a delay. End time delay could be increased in steps of
means end of programme cycle will be in 6 hours and
30 minutes. Press "Start/Pause" button to activate the
time delay. It is not applicable to programme SPIN.
The default delay setting time is greater than the running
time of the program.
Press this button (Fig. 3-7) gently to start or inter-
Press button "Temp." and "Steam" (Fig. 3-8-1) for 3
The display shows
.
u
(Fig. 3-8-2) if a button will be
EN
is displayed.
:
Publicité
Chapitres
Table des Matières
Dépannage
