Axis Q6032-E Guide D'installation page 6

Masquer les pouces Voir aussi pour Q6032-E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Page 6
Install the AXIS T8124 Midspan
The Axis High PoE midspan enables Axis network video products with high power consumption to
receive data and power over the same Ethernet cable. Follow these instructions to connect the
AXIS T8124 and AXIS Q6032-E.
Note:
Note that Axis can only guarantee full functionality with the AXIS T8124, no other High
PoE devices are supported.
1. Connect the AXIS T8124 (Data in) to the network switch using a standard network cable.
2. Connect the AXIS T8124 (Data and Power Out) to the AXIS Q6032-E, using the network cable
that has been connected to the camera (see above).
3. Connect the AXIS T8124 to an AC outlet (100-240 VAC), using the supplied power cable.
AXIS T8124 Indicators
LED
Color
Port
Unlit
Amber
Flashing
Green
AC input
Steady green
AXIS Q6032-E Status LED
Color
Indication
Unlit
Steady connection/normal operation
Amber
Steady for system initiating. Flashes during firmware upgrade or reset to factory default.
Amber/red
No network connection
Red
Firmware upgrade failure
Green
Steady for 10sec. after successful restart
AXIS T8124
Port
connectivity
indicator
AC Input
connectivity
indicator
AXIS Q6032-E
Indication
No camera connected
Insufficient power for camera and heater. Check cable
Power overload
Camera connected, normal behavior
AC power connected
AXIS Q6032-E Installation Guide
Data and
Power out
Data in
Ethernet

Publicité

Table des Matières
loading

Table des Matières