Akai Professional MPD24 Manuel De L'opérateur page 13

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

FULL LEVEL
When the [FULL LEVEL] button is activated, the MPD24 pads always play back at
maximum velocity (127). This way, no matter how hard or soft you hit a pad, the
MPD24 will always trigger the sound at its maximum velocity (volume).
16 LEVELS
When you press [16 LEVELS], you can use the 16 pads to change a selected pad's
velocity in 16 steps. This allows you to have more control over the velocity of the
desired sound. When this button is pressed the last pad that was hit gets mapped to
all 16 pads. The pads output the same note number and pressure controller as the
initial pad, but the velocity is fixed at the values in the diagram below, regardless of
how hard you hit each pad.
PADS AND CORRESPONDING VELOCITIES
103
71
39
7
PROGRAM CHANGE
Pressing this button allows a program change or program with bank change message
to be transmitted. This allows you to tell a hardware or software module which the
MPD24 is controlling, what sound banks to use.
REW, FF, STOP, PLAY, RECORD
These five buttons are dedicated buttons for sending
MIDI Machine Control commands.
111
119
79
87
47
55
15
23
127
TRY IT!
95
Try mapping a sound such
as a snare drum to one of
the pads and then see how
expressive the 16 Levels
63
option allows you to be
with your playing.
31
CONTROL (MMC)
... is a protocol
specifically designed to
remotely control hard
disk recording systems or
other machines over a
MIDI cable.
MIDI MACHINE
7

Publicité

Table des Matières
loading

Table des Matières