Controls And Connections - KEF KASA500 Mode D'emploi

Controls and connections

1 2
1. On/Standby Switch – On/Off
2. LED indicator
On – Green – KASA500 is on and ready to play music.
Standby – Yellow – KASA500 has power but is in standby.
Protection – Red – KASA500 is in protection. Switch off KASA500, let it cool down and check connections.
3. Phase – Select Signal Phase for matching to Satellite speakers
4. Gain – Input Gain (Volume)
Frequency – Sets Low Pass Frequency
5.
This control can be enabled or disabled by KASA500 DSP presets. Set to 140Hz if your surround amp has an internal
subwoofer crossover (LFE out).
4
3 4 5