13. How to configure the DT2000 with Windows OS
If hacking detection has been triggered by entering the incorrect PIN 10 times in succession,
or the drive has been reset,
Once a new User PIN has been created, the DT2000 will need to be initialised and formatted.
To initialise your DT2000, do the following:
1. Create a new User PIN (see section 4).
2. Unlock the DT2000 by entering the new User PIN and connect it to a computer's USB
port.
3. The computer should display the following message:
4. Proceed by clicking on Format disk.
Select FAT32 or NTFS depending on your needs, enter a Volume Label and click Start.
Document No. 480ADT2000.A00
all data on the drive will be lost
DT2000
forever.
Page 12 of 17