Min/Max Mode - Aercus WS1173 Guide D'utilisation

the alarm function has been enabled). Press the SET key to confirm the setting and continue
pressing the SET key to toggle through each alarm mode until it returns to the normal display mode.
 Press the SNOOZE/LIGHT key or no keys for 10 seconds at any time and the alarm mode will return
to Normal Mode
Canceling the Temperature Alarm While Sounding
When a set weather alarm condition has been triggered that particular alarm will sound for 120 seconds and
flash until the weather condition does not meet the alarm level. Press any key to mute the alarm. When the
weather alarm condition is activated again within 10 minutes the alarm will not sound but will continue to
flash until the weather conditions have become more stable. This feature is useful to avoid repeated
triggering for the same alarm value.
Note: The alarm will reactivate automatically once the value has fallen below the set value.
The outdoor weather alarm
When a set outdoor weather alarm has been triggered it will flash on the LCD display and the general
outdoor alarm icon and high/low alarm icon will flash accordingly. For example, in the outdoor temperature
display mode, when the dew point high alarm is triggered the DEW POINT icon will flash along with the
general outdoor alarm icon and high alarm icon, telling the user that the current alarm source is from the
dew point.

5.4 Min/Max Mode

 While in Normal Mode, press the MIN/MAX key to enter the Maximum Mode, the MAX logo and the
general maximum record will be displayed.
 Press the MIN/MAX key again to enter the Minimum Mode, the MIN icon and minimum record will
be displayed
 Press the MIN/MAX key again to return to Normal Mode.
 In the maximum reading mode, press the + key to display the following maximum values together
with the time and date stamp at which these values were recorded. Pressing the SET key will reset
the value to the current reading together with the current time and date.
1. Indoor humidity maximum
2. Indoor temperature maximum
3. Outdoor humidity maximum
4. Outdoor temperature maximum
5. Outdoor dew point maximum
6. Pressure maximum

In the minimum reading mode, press the + key to display the following minimum values together
with the time and date stamp at which these values were recorded. Pressing the SET key will reset
the value to the current reading together with the current time and date.
1. Indoor humidity minimum
2. Indoor temperature minimum
3. Outdoor humidity minimum
4. Outdoor temperature minimum
- 9 -