Airwell RC08C Guide D'utilisation page 3

PRECAUTIIONS
DISPLAY
Information are displayed when the remote control unit is powered up.
Operation Mode
Automatic Heating
Fan only
Dehumidification ( dry)
Displayed when data trasmitted
Clock ( Set hours and minutes)
Displayed when the " timer on " is set and activated
Displayed when the " timer off " is set and activated
Displayed in Sleep Mode Operation
Indicate that the air conditioner is operating in Silence mode
Indicate when activate / inactive Clean mode
Indicate when activate / inactive ionnizer & E.S.F mode
Set temperature or show room temperature
Displayed when the temperature is the room temperature
Indicate that the air conditioner is operating in I FEEL mode
Description of Low battery detection
• The low-battery indicator on the remote control will continue to
blink when the batteries are low, it may reduce the transmission
distance of the remote control and the display becomes blurred.
Replace with new batteries immediately.
•
The low-battery indicator will disappear after the batteries are
replaced.
Fan speed indication
Low speed Medium speed
Auto fan speed
ON/ OFF OPERATION BUTTON
This button turns the air conditioner ON and OFF.
MODE SELECTOR BUTTON
Press this button to modify the air conditioner mode.
( automatic )
When this setting is selected, the air conditioner calculates the
difference between the thermostat setting and the room temperature
and automatically switches to the " cool" , "dry" or " heat" mode.
( heating )
The air conditioner makes the room warmer.
dehumidification ( dry )
The air conditioner reduces the humidity in the room.
( cooling )
The air conditioner makes the room cooler.
( fan )
The air conditioner circulate the air.
COOL / DRY / HEAT
1
TRANSMITTER
When you press the
buttons of the remote
Cooling
control unit, the
mark appears on the
display to transmit the
setting changes to
the receiver in the air
conditioner.
High speed
SLEEP/ECO BUTTON
I FEEL TEMPERATURE
This button has 2 functions: SENSING AND ROOM
Sleep function : Short press this TEMPERATURE
button will activate / inactivate
DISPLAY BUTTON
Sleep function. mark will
Push this button to
appear on the display.
activate the temperature
Economy function : Long press this
sensing function to be
button will activate / inactivate
around the remote control.
Economy function.
This function is available
For detail see "SLEEP MODE" and
under Auto,cool and heat
"ECONOMY FUNCTION
mode.
OPERATION".
TEMPERATURE SETTING BUTTONS
SENSOR
- ( cooler ) Press this button to decrease the set
Air temperature sensor
inside the remote
+ ( warmer ) Press this button to increase the set
control unit detects the
room temperature
Press button "-" and "+" simultaneously to lock or
Where the remote
unlock the keyboard.
control is located.
FAN SPEED SELECTOR BUTTON
Hold down this button for at least 2 seconds to
Silent mode.
TIMER BUTTON
Press the button to start timer ON and OFF setting
procedure Details, please see "SETTING THE TIMER".
SET BUTTON
Push this button to select the functions:
set the present time / set the ON-OFF timer
For detail see "HOW TO SET THE PRESENT TIME"
and "SETTING THE TIMER".
CLR BUTTON
Press this button to clear timer setting.
VERTICAL SWING BUTTON
Push button to activate the supply air flap
MODE CLR
TIMER SET
to auto swing. For detail see "ADJUST THE
SLEEP
AIR FLOW DIRECTION".
TURBO
ECO
ION
I FEEL EYE
CLEAN LIGHT
HORIZONTAL SWING
If the air-condition has horizontal swing
motor, push the button will activate the
horizontal air flow to auto swing.
LIGHT BUTTON
Press this button to turn the indoor unit display ON or
OFF.
TURBO BUTTON
EYE BUTTON(OPTIONAL)
Press this button to
Press this button, with the built-in infrared sensor, the
activate TURBO function
unit can detect existence of humans in the room to
to have a quick cooling
automatically enter into standby or resume operation.
or heating operation.
ION/CLEAN BUTTON
This button has 2 functions:
Ionizer function :Short press this button will activate / inactivate Ionizer function.
Clean function : Long press this button will activate / inactivate Clean function.
For detail see "IONIZER FUNCTION OPERATION (OPTIONAL)" and "CLEAN
FUNCTION OPERATION".
2
temperature.
temperature.
Fan speed is automatically selected by the
microcomputer.
Low speed. Medium speed
High speed.