Toyotomi Kero-Sun LC-3000 Manuel D'utilisation page 15

GENERAL DIRECTIONS FOR USE
Below you will find the main steps to be taken for using your
heater. For more details, please refer to the MANUAL.
1
Remove all packaging materials (refer to Section A, Fig. A).
2
Fill the removable tank
3
Insert the plug into the wall-socket.
4
Ignite the heater using the
5
If required, change the temperature using the adjustment keys
(refer to Section E).
6
Switch off the heater by pressing the
• As a fire precaution, the tank must be filled either when the heater has
been switched off or in another room than the room where the heater is
installed.
• Always ensure that the tank is closed properly after filling it at a safe
distance from all sources of heat and open flames (see Section B).
• The first time the heater is ignited it will smell like "new" for a short time.
• Store all fuel containers with their original caps and seals in a cool and
dark place.
• Fuel ages. Use new fuel at the start of every heating season.
• Only use high quality and water-free pure paraffin in accordance with
local legislation (TOYOTOMI fuel).
• Before changing brands and/or types of fuel make sure that the mobile
heater first completely empties all of the remaining fuel inside the heater.
(refer to Section B, Fig. C).
key ¹ (refer to Section D).
key ¹.
4
3