Care And Maintenance; Declaration Of Conformity - STEINEL PROFESSIONAL AC PRO Signal UP Mode D'emploi

Troubleshooting
Malfunction
Green LED not lighting up

Care and maintenance

The CO air quality sensor is
2
maintenance-free. In the event
of a fault, it is necessary to
change the defective CO air
2
quality sensor.

Declaration of Conformity

This product complies with:
- Low Voltage Directive 2006/95/EC
- EMC Directive 2004/108/EC
- RoHS Directive 2002/95/EC
Functional Warranty
This Steinel product has been
manufactured with utmost
care, tested for proper oper-
ation and safety and then sub-
jected to random sample in-
spection. Steinel guarantees
that it is in perfect condition
and proper working order.
Cause
í Sensor is in start-up phase
í DIP switch LED = 'OFF'
í Sensor module
without power
The warranty period is
36 months and starts on the
date of sale to the consumer.
We will remedy defects caused
by material flaws or manufac-
turing faults. The warranty will
be met by repair or replace-
ment of the defective parts at
our own discretion. The war-
ranty shall not cover damage
to wear parts, damage or de-
fects caused by improper
treatment or maintenance.
Further consequential damage
to other objects shall be ex-
cluded.
- 13 -
Remedy
í wait for approx. 10 sec.
í DIP switch = 'ON'
í Remove sensor module,
clean and re-fit
Claims under the warranty
shall only be accepted if the
product is sent fully assem-
bled and well packed com-
plete with a brief description of
the fault, a receipt or invoice
(date of purchase and dealer's
stamp) to the appropriate
Service Centre.
Repair service:
Our Customer Service Depart-
ment will repair faults not cov-
ered by warranty or after the
warranty period. Please send
the product well packed to
your nearest Service Centre.