DELTACALOR MONZA Notice D'utilisation Et D'installation page 59

Priority in pilot wire sequences
Mode set on the thermostat
MODE AUTO
(comfort)
MODEAUTO
(eco)
MODE AUTO
(manual)
If the open window detection
mostat follows the rules described in the paragraph "Open window detection". The thermostat
displays the value of the set temperature applied to the heater. It takes into consideration the
order of priority shown above.
Description of errors
If the sensor is turned off or disconnected, an error message will appear on the thermostat
display.
Sensor problem
WIFI connection
problem
Pilot wire control mode
Comfort
Comfort -1°C
Comfort -2°C
Comfort -3.5°C / eco
Antifreeze
Stop
Comfort
Comfort -1°C
Comfort -2°C
Comfort -3.5°C / eco
Antifreeze
Stop
Comfort
Comfort -1°C
Comfort -2°C
Comfort -3.5°C / eco
Antifreeze
Stop
is activated and this function detects the opening, the ther-
[ 59 ]
Actual mode set
Comfort
Comfort -1°C
Comfort -2°C
Lower value between Comfort -3.5°C and
19°C
Antifreeze
Stop
Temperature set in ECO mode
Lower value between the temperature set
in ECO mode and "Comfort -3.5 ° C"
Antifreeze
Stop
Manually set temperature
the message «-» is
accompanied by the icon
flashing and the logo
the display.
The WIFI logo is red
on