Buckle Removal; Cover Removal - R82 Wallaroo Guide D'utilisation

A
EN
B
C
D
CARE AND MAINTENANCE

Buckle Removal

1. Locate the metal buckle strap
retainer on the bottom of the child
restraint.
2. Pull retainer away from child
restraint to loosen.
3. Turn the retainer so that the
short side will go through the slot in
the child restraint shell (Fig. A).
4. Push the retainer through slots in
the shell and cover, to the front of
the child restraint (Fig. B).
NOTE: Pull the belly pad over the
metal buckle retainer to remove.

Cover Removal

WARNING! Do not take apart
the H-harness. Never remove the
buckle tongues from the H-harness.
They cannot be reattached after
removal. If reassembled incorrectly,
the child restraint may not perform
as intended.
Loosen the H-harness by lifting the
harness adjuster lever while pull-
ing the H-harness padded covers
forward as far as possible.
Unhook the H-harness straps from
the harness yoke on the rear of the
child restraint (Fig. C).
Release the cover clips (Fig. D).
30
support.R82.org