Installation Procedure For Windows Xp Os; Verifying Proper Installation (Windows Xp Os) - Belkin F5U219 Manuel De L'utilisateur

Les langues disponibles

Installation

Installation Procedure for Windows XP OS

1. Locate an available PCI slot on your computer.

2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully

seated.

3. Insert the Belkin USB 2.0 driver installation CD into your computer's CD-

ROM drive.

4. After installing the PCI Card, turn on the computer.

5. After loading, the Windows XP OS will detect "NEC PCI to USB Open Host

Controller". The required driver support will be automatically installed. No

user input is required. This will repeat one more time.

6. The Windows XP OS will detect "NEC PCI to USB Enhanced Host

Controller". A "New Hardware Wizard" window will open. With the

installation CD in the drive, select "Next" to install the driver. The

Windows OS may display a message indicating that the driver that you

are installing has not passed "Windows Logo testing". Click "Continue

Anyway".

7. The Windows XP OS will detect "USB Root Hub". The required driver

support will be automatically installed. This will repeat two times.

Installation is now complete.

After installation, check the Windows XP OS's Device Manager to confirm

that the PCI Card has been installed.

1. Right-click on "My Computer".

2. Select "Properties".

3. Select the "Hardware" tab and click on the "Device Manager" button.

4. Click the plus sign (+) next to "Universal Serial Bus Controllers". The

"Device Manager" list will now include two "NEC USB Open Host

Controller" entries, one "Belkin USB 2.0 Hi-Speed Host Controller" entry,

and two additional "USB Root Hub" entries.

Table des Matières