Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MENU OPTION: SYSTEM
SYSTEM OPTIONS
When AUTO-DIM is set to ON, the backlight automatically adjusts in accordance with the outer brightness.
When the B-LINE is set to ON, the electronic distance label will be displayed when the blue camera 3 trigger wire is activated.
Both PAL and NTSC color system options are available. PAL offers automated color correction and 25 frames per second (fps), popular in Europe
and Australia, while NTSC uses manual color correction and 30 fps, popular in the U.S. and Asia.
Using the monitor:
1. Press M to enter the Menu
2. Use the + or - to highlight the SYSTEM Option
3. Press the down arrow to enter the SYSTEM Option
4. Use the + or - to highlight the desired adjustment
5. Press the down arrow to enter the adjustment option
6. Use the + or - to change the settings
7. Press the down arrow to exit the adjustment option
8. Press M twice to return to the main screen
MENU OPTION: PLAY
RECORDING PLAYBACK
See Record section for setting up a passcode. In order to access the menu after initial setup, you will need the passcode.
Using the monitor:
1. Press S to enter the single image mode to be adjusted.
2. Press M to enter the Menu
3. Use the + or - to highlight the PLAY Option
4. Press the down arrow to enter the PLAY Option
5. Use the + or - to highlight the desired folder labeled by the dates. (See below)
6. Press the down arrow to enter the folder.
7. Use the + or - to highlight the desired recording labeled by the time and image
channel. (See below)
8. Press the down arrow to play the recording
9. Press M twice to return to the main screen
Using the remote:
1. Press MENU to enter the Menu
2. Use the < or > to highlight the SYSTEM Option
3. Press OK to enter the SYSTEM Option
4. Use the < or > to highlight the desired adjustment
5. Press OK to enter the adjustment option
6. Use the < or > to change the settings
7. Press OK to exit the adjustment option
8. Press MENU twice to return to the main screen
Using the remote:
1. Press SEL to enter the single image mode to be adjusted
2. Press MENU to enter the Menu
3. Use the < or > to highlight the PLAY Option
4. Press OK to enter PLAY Option.
5. Use the < or > to highlight the desired recording labeled by the time and image
channel. (See below)
6. Press OK to enter the folder
7. Use the < or > to highlight the desired recording labeled by the time and image
channel. (See below)
8. Press OK to play the recording
9. Press MENU twice to return to the main screen
Page 9 of 11
Publicité
Table des Matières
