Beko BKK 3030 TB Manuel D'utilisation page 8

3 Operation
C
To operate the blender at the low
speed, turn the control dial (8) to "1".
C
If you want to blend with a higher
speed, turn the control dial (8) to the
desired speed level (2-3).
For short pulses of blending with a
C
high speed, turn the control dial (8) to
"P". When you release the control dial
(8), the blender will stop and return to
"0" automatically.
If ingredients are to be added during
C
the blending process, then add them
through the opening in the lid (1). To
do this, take out the cap/measuring
cup (2).
9. After the desired consistency of the blended food
has been reached, turn the control dial (8) to 0 to
switch off the blender.
A
WARNING: Never run the blender
for longer than 2 minutes, otherwise
it would overheat.
WARNING: After running the
A
appliance for 2 minutes, let it cool
down before using it again.
WARNING: Be sure the motor has
A
complete stopped before removing
glass jug (3) from the motor housing
(7).
A
WARNING: Do not place any
utensil (scraper, fork, etc.) in the glass
jug while blender is operating.
10. Pull the power plug out of the power outlet.
8 / 43 EN
11. Take the glass jug (3) off from the motor housing
(7) by turning it counterclockwise and lifting the
glass jug upwards (3).
12. Take off the lid and pour the mixture into glasses
or other containers.
Jug Blender / User Manual