Pioneer PX Serie Mode D'emploi page 6

EN-4
CONTROL FUNCTIONS
Button
Primary
 If the balance is Off,
Function
(Short
 If the balance is On,
Press)
Secondary
 Zeros the current
Function
(Press and
Hold)
 None
(Extended
Press)
Menu
 Accepts the current
Function
(Short
Press)
DISPLAY
Net (NET)
Stability (*)
Negative (-)
Centre of Zero (>0<)
Preset tare (PT)
Instructional Messages
3.2 Principal Functions
Zeroing:
Taring:
Weighing:
On / Zero
 Sends the current
turns on the balance.
sets zero.
Off
 Changes weighing
value.
 None
Yes
 Rejects the current
(blinking) setting on
the display.
 Increments a value
Press Zero to zero the balance.
With no load on the pan, press
empty container on the pan and press Tare. Add material to the container
and its net weight is displayed. After the container and the objects are
removed, the tare value will be displayed as a negative number. Press Tare
to clear.
First press Zero to set the display to zero. Place an object on the pan. The
display indicates the gross weight.
Print
 Operation is
displayed value to
the serial interface.
Unit
 Changes
units.
 None
No
 Reverts back to
(blinking) setting on
the display.
 Decrements a
being entered.
Zero to set the display to zero. Place an
Function
 Performs tare
dependent on the
application mode.
Mode
 Enters the main
application mode.
 Views the preset
Back
 Immediately exits
previous menu
 Aborts a
item.
value being
entered.
Tare
operation.
Menu-Cal
menu. Calibration
is the first sub-
menu.
Tare value.
Exit
the sub-menu.
calibration in
progress.
Result Field:
Information varies by
application
Unit