Philips SalonStraight XL HP8350/00 Mode D'emploi page 9

 Set the on/off slide switch to 'I' to switch on the appliance (Fig. ).
The default temperature setting of 10 appears on the display. As
,
soon as the appliance has heated up to this setting, the word
'READY' appears on the display (Fig. 5).
Never leave the appliance unattended when it is plugged in. Always put
the appliance on a heat-resistant surface when it is heating up and
when it is hot.
For safety reasons, the straightener automatically switches off after
having been on for 1 hour.
 Select a temperature setting (10 to 0) that is suitable for your
hair type.
Always select a low setting when you use the straightener for the first
-
time.
- For coarse, curly or hard-to-straighten hair, select a medium to high
setting (170 and up).
For fine, medium-textured or softly waved hair, select a medium to
-
low setting (160 and below).
Note: Take extra care with pale, blonde, bleached or colour-treated hair, since
it is susceptible to damage at high temperatures.
5 Use the + and - buttons to set the appropriate temperature
setting. (Fig. 6)
The display shows the selected temperature setting.
,
When the appliance has heated up to the selected setting, the word
,
'READY' appears on the display.
The bars on the display show the remaining usage time of the
,
appliance. The total usage time is 60 minutes. Every ten minutes,
one of the six bars disappears. After 60 minutes, the appliance
switches off automatically.
6 Comb or brush your hair so that it is disentangled and
smooth. (Fig. )
 Use a comb to divide the hair into sections. Do not put too much
hair in one section.
EnglisH