Klarstein 10032040 Manuel D'utilisation page 16

EN
16
Auto dehumidifying mode
Under this mode, if room humidity > setting humidity+5%, compressor will start, and
fan will works; if room humidity setting humidity 5%, compressor will stops, fan will
work according to the original setting; if setting humidity 5% room humidity setting
humidity+5%, the unit will continue working according to the original settings. The initial
humidity value is 50%.
Cloth dry mode
Under this mode, the unit will work regardless of the room humidity, compressor works,
and fan will work from high speed, fan speed is adjustable.
Drainage manually
• When water tank is full, water-full indicator is on, the unit will stop working, and
buzzer will sound 10times till water is pour off.
• Take out water tank, pour away water.
• Replace the water tank, dehumidifier restarts working. Please install the water tank
as the following photo.
NOTE: Before putting in the water tank, please ensure the float is flexible.