Selecting The Temperature Setting - Inventum HN197V Mode D'emploi

Masquer les pouces Voir aussi pour HN197V:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Additional information HL197V
The area intended for the head cannot
be heated. Guide the plug-in coupling plug through
the slot on the side section [10] and then
connect the switch to the electric underblanket
by plugging together the plug-in coupling [8].
Then pull the side section over the sides of your
mattress like a contour sheet. The underblanket is
designed to fit mattresses of the size 210x90 cm
and 210x100 cm. Then secure your contour sheet as
accustomed so that the underblanket is between your
mattress and the contour sheet.
4.3 Switching on
Slide the ON/OFF switch sideways to the ON ( I ) position to switch on the electric underblanket. When switched on, the display lights
up and at first displays all the segments for approx. 2 seconds. After that, the following basic settings are displayed:
Temperature setting for body area: 0
Temperature setting for foot area: 0
Automatic switch-off time: 1 h (= 1 hour)
NOTE
The illuminance level drops after approx. 5 seconds so that your sleep is not disturbed during the night.
NOTE
This electric underblanket has a rapid heating function, allowing for faster warming in the first 15 minutes.
During this time, "Turbo" flashes on the display.
If the underblanket is rapidly switched off and then on again during the first 15 minutes, the fast heating function is deactivated for
safety reasons. In this case the word "Turbo" does not appear on the display. However the electric underblanket is heated as normal.
To reactivate the fast heating function the electric underblanket must be completely switched off for 20 minutes.

4.4 Selecting the temperature setting

Press the button (3) to select the temperature setting for the body area.
Press the button (5) to select the temperature setting for the foot area.
Level 0:
OFF
Level 1:
minimum heat
Level 2-8:
individual heat
Level 9:
maximum heat
NOTE
Switching sequence of the temperature settings: 0-9-8-7-6-5-4-3-2-1-0-9...
CAUTION
If the electric underblanket is used continuously (for several hours)
it is reccomended to use the lowest setting (1) of the control to
avoid overheating of the user.
NOTE
• The quickest way to heat up the electric underblanket is to select the highest temperature setting of the controller, first.
• We strongly recommend switching on the electric underblanket approx. 30 minutes before going to bed and
covering it with the quilt to prevent the warmth from escaping.
16
English
10
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hl197v

Table des Matières