Connections - JVC GR-DVL300EG Mode D'emploi

8
EN
To assure safety, make sure all units are turned off before making any connections.
We recommend that you use the AC Power Adapter/Charger.
When a core filter is attached to a cable, be sure to plug the connector equipped with the
core filter into the video camera.
Do not make any connections to the video camera's DV OUT connector.
WHEN CONNECTED TO A VCR EQUIPPED WITH A JLIP JACK
When JLIP Video Capture is used:
To PC jack
Video Camera
To AV jack
NOTE:
The JLIP cable can only be
used with JVC VCRs equipped
with a JLIP jack.
PC connection cable
To JLIP jack
When JLIP Video Producer is used:
S-VIDEO cable
To S OUT jack
Connect this if the video
source unit has an S-Video
input jack.
AUDIO/VIDEO cable
To COM port
(RS-232C)
To S-VIDEO
input jack
White to
AUDIO L
If your VCR has a SCART
Red to
connector, use the cable
AUDIO R
adapter.
Yellow to
VIDEO

CONNECTIONS

PC
JLIP cable
To JLIP jack
VCR
(Recording deck)