Care And Cleaning; Saftey Instructions - QEO FT 1300-1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAX mode
Press the MAX key to enter the MAX mode. The thermometer
then records and updates the maximum values and the MAX
icon appears on the display.
Press the MAX key again to exit the MAX recording mode.
In the MAX mode, press HOLD key to stop recording,
press HOLD again to resume recording.
Backlight mode
Press the backlight key to turn on the LCD backlighting
function. The LCD backlighting will auto-off after the backlight
key is released approximately 5 seconds.
Tc (temperature compensator) checking mode
Press and hold the "Tc" key to enter the temperature compen-
sator checking mode. The thermometer will display inside
temperature.

CARE AND CLEANING

Change of battery
If symbol
Turn the meter off and disconnect the temperature probe.
Remove the rubber holster that surrounds the entire meter by
pulling it over the top of the meter.
Remove the small head screw on the rear of the meter.
Open the battery compartment and replace the 9V battery.
Re-assemble the meter before operating.

SAFTEY INSTRUCTIONS

 Please follow up instructions given in operators' manual.
is displayed the 9V battery must be replaced.
12

Publicité

Table des Matières
loading

Table des Matières