ESA AUTOMATION EW3 Serie Instructions Pour L'installation page 14

WARNING:
configuration will seriously damage
components - Fig. 15.
IMPORTANT: The earth of the
devices connected to the serial
and/or parallel
ports MUST
potential as the 0V supply of the
EW3. The circulation of current
between the 0V supply and the
earth of the communication ports
could cause damage to certain
components of the EW3 or of the
devices connected to it.
Working temperature
0 / +50°C
Electromagnetic
compatibility
Restriction of
requirements are not ensured in
residential areas.
Entering set-up parameters
a. Carry out all connections with the
monitor off.
b. Start-up the monitor.
c. Start up PC.
d. Load touch screen drivers
(EW3xxA only).
e. Check that EW has been set with
resolution of:
! EW315 – 1366x768
! EW322 – 1920x1080
Communication ports
Fig. 16 . 17 . 18 . 19 . 20
Cleaning
For cleaning
recommend
Alcohol.
These
communication
have the same
use: protection
the EW3
Denaturalised Ethyl
two Certifications
All the products described in this
manual comply with the following
standards:
electromagnetic
(EMC):
!
(2007)
!
(2005)
and thus are in line with:
Council Directive
EMC 2004/108/EC
we
emissions EN
immunity EN
compatibility
61000-6-4
61000-6-2