Accessing Parameters And Errors - Maytronics DOLPHIN Mode D'emploi

4.2 Accessing Parameters and Errors

1. Due to tracks and brushes movement – turn the robot upside down before connecting it to the
power supply and to the main supply.
2. Press the Parameters button to access the parameters and errors.
3. The following message is displayed: You are about to turn on the robot. are you sure?
Press OK to turn on the robot.
4. The Parameter log screen will be displayed. Use the fault description displayed on the screen to
assess the problem (use appendix for information about the fault description).
Note: You can also share and refresh the log file as required.
Dolphin Service Kit
| User Instructions
7