Functions; Battery Charging; Internal Battery - VISIOMED bewell connect MyThermo MicroSecond Flash BW-CX10 Guide D'installation Et D'utilisation

5. FUNCTIONS

1. Specially designed to take the body temperature of a person regardless of the room
temperature.
2. Quick and reliable results thanks to the HEIMMANN infrared detection system.
3. Seek medical attention immediately if temperature is above the preset threshold or
temperature is in excess of the device's limits for displaying an accurate measure.
4. Temperature diagnostic: color indicator for indicating and interpreting the temperature obtained.
5. Functions
- Measurement range for BODY mode: 89.6°F – 109.4°F / 30°C - 43°C and SURFACE TEMP mode:
32°F - 199.9°F / 0°C - 93.3°C.
- Hi displays when the result is above 109.4°F / 43°C.
- Lo displays when the results is below 86°F / 30°C.
6. LCD back-lit digital screen.
7. Bluetooth connection to follow temperature curve through BewellConnect® MyThermo
Application.
8. Data displayed in Celsius or Fahrenheit.
9. Automatic stop.
10. Charging via USB cable.
Additional uses:
The MyThermo BW-CX10 can also be used to measure the temperature of a surface, or room
temperature (by using the SURFACE TEMP or ROOM function).

6. BATTERY CHARGING

Before using MyThermo for the first time, please charge the battery via the USB cable.

INTERNAL BATTERY

Battery DC3.7V (lithium battery)
Battery can be charged and used regularly
CHARGE INDICATOR
When MyThermo is uncharged or dead, the "Battery" symbol is displayed on the screen in order
to indicate the level of charge.
You can continue on using MyThermo, it will emit 5 long beeps in a row and will automatically
switch off, when the battery is totally dead.
When the battery is fully charged, the device is automatically powered down to avoid
overcharging and prolong battery life.
The battery should be charged every 6 months even if the device has not been in use.
12 BewellConnect - BW-CX10 - User Manual - 042017v3
8
-
-
-
9
9
T
a
a
M
N
o
M
B
P
t
N
I
i
P
T
9
P
u