Table des Matières
Publicité
GAS WASHER COMPONENTS
1.
3.
2.
4.
5.
6.
1.
Spray Gun - Controls the application of water onto cleaning surface with trigger device.
Includes trigger lock. Allows you to switch between various spray tips.
2.
High Pressure Hose - Designed to withstand the pressure created by the pump.
3.
Fuel Tank - FIll tank with regular, unleaded fuel. Always leave room for fuel expansion.
4.
Pressure Control Knob - Changes pressure of water stream (not included on all models).
5.
Pump - Develops high pressure. Connect the garden hose to the inlet of the water pump,
and connect the high-pressure hose to the outlet. Connections vary by model.
6.
Detergent Siphoning Hose - Used to draw detergent into the low pressure stream.
7.
Muffler/Exhaust - Reduces noise of the engine and expels heat.
8.
Air Filter - Protects engine by filtering dust and debris out of intake air.
9.
Spray Tips - Detergent, 0°, 15°, and 40°: for various cleaning applications.
For the location of engine components such as the choke lever, throttle, and ON/OFF switch
(if applicable), refer to the engine user manual included with your pressure washer. For more
reference material, (spec sheets, part breakdowns, product photos and more), please visit:
16
9.
11.
10.
9.
8.
8.
7.
GAS WASHER COMPONENTS
1.
12.
7.
1.
Spray Gun Controls the application of water onto cleaning surface with trigger
device. Includes trigger lock. Allows you to switch between various spray tips.
2.
Spray Tips Detergent, 0°, 15°, and 40°: for various high pressure cleaning
applications.
3.
High Pressure Hose Designed to withstand the pressure generated by the pump.
4.
Pressure Control Knob Changes pressure of spray (not included for all models).
5.
Pump Develops high pressure. Connect the garden hose to the inlet of the water
pump, and connect the high-pressure hose to the outlet.
6.
Detergent Siphoning Hose Use to siphon pressure washer safe detergent into the
low pressure stream.
7.
Engine Switch Set switch to "On" for recoil starting. Set switch to "Off" to stop a
running engine.
8.
Recoil Starter Used for starting the engine manually.
9.
(Top) Choke Lever Prepares a cold engine for starting.
(Bottom) Fuel Valve Used to turn fuel supply on and off to engine.
10.
Throttle Lever Sets engine in starting mode for recoil starter.
11.
Air Filter Protects engine by filtering dust and debris out of intake air.
12.
Fuel Tank Fill tank with regular unleaded fuel. Always leave room for fuel expansion.
2.
3.
4.
5.
6.
17
Publicité
Table des Matières
