Disposal; Ec-Declaration Of Conformity - Batavia BT-CLM001 Mode D'emploi

English
for comparing one tool with another. The
declared vibration total value may also be
used in a preliminary assessment of
exposure.
Warning!
The vibration and noise emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used, in particular,
what kind of work piece is machined.
It is necessary to identify safety measured
to protect the operator that are based on an
estimation of exposure in the actual
conditions of use (taking account of all
parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce
vibration exposure include wearing gloves
while using the tool, limiting working time,
and using accessories in good condition.

12. Disposal

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The
electric power tool and its accessories are
made from various materials such as
metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist
shop or local council. The product and the
user manual may be subject to changes.
Technical data may be changed without
prior notice.
Batteries
12.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of
explosion.
10

13. EC-Declaration of conformity

We, the Batavia B.V., Weth.
Wassebaliestraat 6d, NL-7951 SN
Staphorst, declare by our own responsibility
that the product Cordless cylinder
lawnmower, Model BT-CLM001, Item-No
7064054 is according to the basic
requirements, which are defined in the
European Directives Electromagnetic
Compatibility 2014/30/EU (EMC), 2006/42/
EC (Machinery), 2011/65/EU (RoHS),
2000/14/EC (Noise Directive) and their
amendments. For the evaluation of
conformity, the following harmonized
standards were consulted:
EN 60335-1:2012+A11+A13;
EN 60335-2-77: 2010;
EN 62233:2008;
AfPS GS 2014:01;
EN55014-1:2017;
EN55014-2:2015;
EN ISO 3744:1995;
ISO 11094:1991
Staphorst, 24 January 2022
Meino Seinen, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.