Canopy Operation - Foundations Style May Vary Instructions De Montage Et D'utilisation

Stroller Operation & Use (continued)

Canopy Operation:

To extend canopy:
1.
Pull main canopy tube forward
2.
Rotate front section of canopy forward
To retract canopy:
1.
Rotate front section of canopy back over
top of canopy
2.
Pull main canopy tube toward rear of
stroller
2
To remove canopy:
1.
Open sides of canopy around stroller handle by
pulling fabric hook & loop fasteners apart
(Fig. 3).
2.
Pull rear panel of canopy up and out of opening
between stroller handle and handle support
3.
Remove canopy from rear support tube by
releasing hook & loop fasteners.
4.
Remove rear canopy tube (short tube) by pressing
retainer tab in
2 (Fig. 4).
5.
Repeat step 4 for opposite side of stroller.
6.
Remove main canopy tube (long tube) by pressing
retainer tab in
(Fig. 4).
2
7.
Repeat step 6 for opposite side of stroller.
To attach canopy:
1.
Position canopy with rounded front section
on top and place canopy in rear seat area
and over top of front seats.
2.
Secure Main Canopy Tube (long tube)
by pushing end of Main Canopy Tube into
Canopy Retainer slot located on outside
of handle near the armrest (Fig. 5).
15
1
1
(Fig. 2).
(Fig. 2).
1
and sliding rear canopy tube up
1
and sliding main canopy tube up
Front
Section
(Fig. 1).
2 (Fig. 1).
Canopy
Front
Section
Main
Canopy Tube
1
2
.
1
Main
Canopy
Tube
Armrest
Fig. 1
2
1
Main
Style May Vary
Fig. 2
1
2
Style May Vary
Fig. 3
2
1
Fig. 4
2
1
Retainer Tab
Fig. 5
Canopy
Retainer