LD Systems CDMP1 Manuel D'utilisation page 8

CONTROL ELEMENTS:
15
MUTE
Mute and demute.
16
CD / USB / SD
Choose between CD, USB or SD function.
17
+10
Press to progress 10 songs and continue play.
18
PROG
Press to enter programming mode.
19
PLAY MODE
Press to switch between play modes:
(PLAY ALL) All (programmed) tracks will play in sequence.
(REPEAT TRACK) (programmed) track will repeat.
(REPEAT ALL) All tracks will play in sequence and then repeat.
(RANDOM REPEAT) All tracks will repeat in random order.
20
SENSOR
Infrared sensor for remote control signals.
21
FUSE
Under normal operation the fuse should not blow. A blown fuse usually indicated an overload or fault condi-
tion. To change the fuse disconnect the power cord and replace the blown fuse. Refer to the specifiactions
for the fuse current ratings.
22
CHANGING VOLTAGE
To change the voltage, slide voltage selector to desired voltage setting. The setting must match your local
line voltage rating.
23
UNBALANCED RCA OUTPUT
24
BALANCED XLR OUTPUT
25
GROUNDING
8