Resetting The Device; Factory Reset - CAME BPT TH/350 Manuel D'installation Et D'utilisation

Counting operating hours
A
B

Resetting the device

C
This operation does NOT erase any customised programs, which will be restored, along
with the other data, when the device is restarted (see table).

Factory reset

To restore all the factory settings, press the
then press button R.
Pull out the unit body.
Activate MANUAL operating mode
A.
Press button C B.
The display shows the operating
time for 5 seconds.
To reset the counter, press the
button
visible.
Malfunctioning, interventions
and other technical reasons may
require the device to be reset.
Pull out the unit body.
Press button R C.
+ + 1÷7 buttons at the same time and
while the figure is