FF Europe Physionics EXBK06 Mode D'emploi Original page 24

EN
ASSEMBLY INSTRUCTIONS
Step 4
Insert the seat post (9) into the mainframe
(1) and line up the holes that give the
correct seat height. Secure the seat in
position with the adjustment knob. (8)
Step 5
Plug the upper computer wire to the
computer (17), then slide the computer
down to the computer holder (16) situated
at the top of the Front Post. Fix the handle
(19) using two Allen key bolts (18).
Step 6
The pedals (7 and 13) are marked L and R
- left and right. Connect them to their
appropriate crank arms. The right crank
arm is on the right hand side of the cycle
as you sit on it.
Note that the right pedal should be
threaded on clockwise and the left pedal
on anti-clockwise.
24